行业新闻
原文：
China suppliers of toilet flush valves and tank fittings are underlining product development on water-saving solutions amid growing demand and strict standards for such modelsPlug Valves
in key export markets.
Shipments from the country consist mainly of dual-flush types that employ partial or full modes for washing down liquid or solid wastes, respectively. The bulk of releases feature universal designs, particularly the 3 and 6L versions that are standard in the EU and the US.
Models are sometimes bundled with tank fittings and are aimed at the Mud Valves
repair and DIY segments. Many can be used with top-, side- or front-mount lever or push-button activators. Cables and wires are added for easy installation.
Electronic counterparts are offered as upscale alternatives, particularly in Europe and North America. One such product from Compas (Xiamen) Plumbing Technology Co. Ltd integrates wall-mount proximity sensors that can detect users 80 to 100cm away. It initiates automatically partial flushing if the toilet is used for less than 60 seconds or a full cycle if the preset time is exceeded.
Toilet tank fitting sets, meanwhile, include the main fill valves and the overflow pipes in various heights and diameters. Those with 3in valves let out roughly 2.8L of water per second, whileReducing Valves
2in variants release 2.4L. The former is popular in North America.
Most China-made flush valves and toilet tank fittings comply with CE requirements. A number also bear the cUPC mark.
North America and the Asia-Pacific region are the biggest shipping destinations, eachForged Steel Valves
absorbing about 30 percent of China’s exports. The euro zone takes in roughly 20 percent.
Some suppliers, however, plan to promote their selections in other markets through 2010. A few intend to introduce releases in South Africa by participating in trade shows there, while several aim Water power control valves
to explore the opportunities that arise from the China-Asean Free Trade Area agreement.
原文来自： http://www.shreveporttimes.com/article/20091205/NEWS01/91205007/1060
“Gas line valve release investigated”是由 上海天阀实业有限公司提供的阀门新闻，中文译文仅供参考，以下提供站内导航搜索：
中国调节阀网 调节阀产品 调节阀知识 调节阀厂商 调节阀博客 调节阀行业新闻
以下是参考译文：
译文：聚焦双冲水系统阀
中国供应商的厕所冲洗阀，水箱配件是化工泵
强调节水解决方案中不断增长的需求，并在主要出口市场，例如严格的标准的产品开发模式。
从该国出货量主要包括双冲水方式，即聘请为冲洗液体或固体废物，分别部分或全部模式。大部分排污泵
功能的版本普遍的设计，特别是3和61的版本是在欧盟和美国标准。
模型有时捆绑水箱配件，并在维修和DIY领域的目的。许多可用于顶，侧面或正面安装杆或按钮激活。电缆和电线，增加了对安装方便。
电子对应的是提供高档的替代品，尤其是在欧洲和北美。一位来自康帕斯（厦门）科技真空泵
有限公司等水暖产品的集成壁挂式接近传感器，可以检测用户80至100厘米了。它会自动启动，如果局部冲洗厕所是少于60秒或一个完整的循环使用，如果超出了预设的时间。
水箱配件套，同时，包括主阀和填写在不同高度和直径的溢流管。那些有3英寸阀门租出大约每秒水2.8L，而2英寸的变种版本2.4升。前者是在北美流行。
大多数中国制造的厕所冲洗阀，水箱配件符合CE要求。一个数字也承担迎新夜大关。
北美和亚太地区是最大的航运目的地，每吸收大约30中国的出口增长。欧元区发生在约百分之二十。
一些供应商，然而，计划到2010年，以促进在其他市场的选择。一些打算在油泵
南非参加在新闻稿表明，存在着贸易，而一些旨在探索的机会，从中国─东盟自由贸易区的协议产生。
更多新闻
丰企调节阀系列
依耐调节阀系列
日美调节阀系列
埃非凯调节阀系列
一环调节阀系列
赛泰调节阀系列
天阀调节阀系列
泰丰调节阀系列
永鹏调节阀系列
广告位申请